|
|
EXL-88 < COMPONENT DIAGNOSIS > [XENON TYPE] LICENSE PLATE LAMP CIRCUIT LICENSE PLATE LAMP CIRCUIT Component Function Check INFOID:0000000003135355 NOTE: 1. CHECK LICENSE PLATE LAMP OPERATION IPDM E/R AUTO ACTIVE TEST 1. Activate IPDM E/R auto active test. Refer to PCS-11, "Diagnosis Description" . 2. Check that the license plate lamp is turned ON. CONSULT-III ACTIVE TEST 1. Select "EXTERNAL LAMPS" of IPDM E/R active test item. 2. With operating the lighting switch, check that the license plate lamp is turned ON. Is the license plate lamp turned ON? YES >> License plate lamp circuit is normal. NO >> Refer to . Diagnosis Procedure INFOID:0000000003135356 1. CHECK LICENSE PLATE LAMP BULB Check the applicable lamp bulb. Is the bulb normal? YES >> GO TO 2. NO >> Replace the bulb. 2. CHECK LICENSE PLATE LAMP OPEN CIRCUIT 1. Turn the ignition switch OFF. 2. Disconnect IPDM E/R connector and the license plate lamp connector. 3. Check continuity between the IPDM E/R harness connector and the license plate lamp harness connec- Does continuity exist? YES >> GO TO 3. NO >> Repair the harnesses or connectors. 3. CHECK LICENSE PLATE LAMP GROUND OPEN CIRCUIT Check continuity between the license plate lamp harness connector and the ground. Does continuity exist? YES >> Replace the license plate lamp. NO >> Repair the harnesses or connectors. TAIL : License plate lamp ON Off : License plate lamp OFF IPDM E/R License plate lamp Continuity Connector Terminal Connector Terminal RH E5 7 D117 1 Existed LH D112 1 License plate lamp Ground Continuity Connector Terminal RH D117 2 Existed LH D112 2 |