Infiniti EX35. Manual - part 492

DLK-182

< SYMPTOM DIAGNOSIS >

[INTELLIGENT KEY SYSTEM]

PANIC ALARM FUNCTION DOES NOT OPERATE

PANIC ALARM FUNCTION DOES NOT OPERATE

Description

INFOID:0000000003729040

NOTE:
• Before performing the diagnosis following procedure, check “Work Flow”. Refer to 

DLK-7, "Work Flow"

.

• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and

check each symptom.

CONDITIONS OF VEHICLE (OPERATION CONDITIONS)

• Ignition switch is in OFF or LOCK position.
• Intelligent Key is removed from key slot.

Diagnosis Procedure

INFOID:0000000003729041

1.

CHECK REMOTE KEYLESS ENTRY FUNCTION

Check remote keyless entry function.

Does door lock/unlock with Intelligent key button?

YES

>> GO TO 2.

NO

>> Go to 

DLK-172, "Description"

.

2.

CHECK VEHICLE SECURITY ALARM OPERATION

Check vehicle security alarm operation.

Does alarm (headlamp and horn) active?

YES

>> GO TO 3.

NO

>> Go to 

DLK-172, "Description"

.

3.

CHECK “PANIC ALARM SET” SETTING IN “WORK SUPPORT”

Check “PANIC ALARM SET” setting in “WORK SUPPORT”.
Refer to 

DLK-49, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Set “PANIC ALARM SET” setting in “WORK SUPPORT”.

4.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-38, "Intermittent Incident"

.

NO

>> GO TO 1.

HAZARD AND HORN REMINDER DOES NOT OPERATE

DLK-183

< SYMPTOM DIAGNOSIS >

[INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

HAZARD AND HORN REMINDER DOES NOT OPERATE

Description

INFOID:0000000003729042

NOTE:
• Before performing the diagnosis following procedure, check “Work Flow”. Refer to 

DLK-7, "Work Flow"

.

• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and

check each symptom.

CONDITIONS OF VEHICLE (OPERATION CONDITIONS)

• Ignition switch is in OFF or LOCK position.
• Intelligent Key is removed from key slot.

Diagnosis Procedure

INFOID:0000000003729043

1.

CHECK “HAZARD ANSWER BACK” SETTING IN “WORK SUPPORT”

Check “HAZARD ANSWER BACK” setting in “WORK SUPPORT”.
Refer to 

DLK-49, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Set “HAZARD ANSWER BACK” setting in “WORK SUPPORT”.

2.

CHECK “HORN WITH KEYLESS LOCK” SETTING IN “WORK SUPPORT”.

Check “HORN WITH KEYLESS LOCK” setting in “WORK SUPPORT”.
Refer to 

DLK-49, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Set “HORN WITH KEYLESS LOCK” setting in “WORK SUPPORT”.

3.

CHECK HAZARD WARNING LAMP

Check hazard warning lamp.
Refer to 

DLK-105, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK HORN

Check horn.
Refer to 

DLK-100, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-38, "Intermittent Incident"

.

NO

>> GO TO 1.

DLK-184

< SYMPTOM DIAGNOSIS >

[INTELLIGENT KEY SYSTEM]

HAZARD AND BUZZER REMINDER DOES NOT OPERATE

HAZARD AND BUZZER REMINDER DOES NOT OPERATE

Description

INFOID:0000000003729054

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-7, "Work

Flow"

.

• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and

check each symptom.

CONDITIONS OF VEHICLE (OPERATING CONDITIONS)

• Intelligent Key is removed from key slot.
• Ignition switch is in OFF position.
• No Intelligent Keys are inside the vehicle.

Diagnosis Procedure

INFOID:0000000003729055

1.

CHECK “HAZARD ANSWER BACK” SETTING IN “WORK SUPPORT”

Check “HAZARD ANSWER BACK” setting in “WORK SUPPORT”.
Refer to 

DLK-48, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Set “HAZARD ANSWER BACK” in “WORK SUPPORT”.

2.

CHECK “ANS BACK I-KEY LOCK” SETTING IN “WORK SUPPORT”

Check “ANS BACK I-KEY LOCK” setting in “WORK SUPPORT”.
Refer to 

DLK-48, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK)"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Set “ANS BACK I-KEY LOCK” in “WORK SUPPORT”.

3.

CHECK “ANS BACK I-KEY UNLOCK” SETTING IN “WORK SUPPORT”

Check “ANS BACK I-KEY UNLOCK” setting in “WORK SUPPORT”.
Refer to 

DLK-48, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK)"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Set “ANS BACK I-KEY UNLOCK” in “WORK SUPPORT”.

4.

CHECK HAZARD WARNING LAMP

Check hazard warning lamp.
Refer to 

DLK-105, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.
Refer to 

DLK-92, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-38, "Intermittent Incident"

.

NO

>> GO TO 1.

KEY REMINDER FUNCTION DOES NOT OPERATE

DLK-185

< SYMPTOM DIAGNOSIS >

[INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

KEY REMINDER FUNCTION DOES NOT OPERATE

Description

INFOID:0000000003729056

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-7, "Work

Flow"

.

• Understand the operation when does it work, refer to 

DLK-35, "KEY REMINDER FUNCTION : System

Description"

.

Diagnosis Procedure

INFOID:0000000003729057

1.

CHECK “ANTI KEY LOCK IN FUNCTI” SETTING IN “WORK SUPPORT”

Check “ANTI KEY LOCK IN FUNCTI” setting in “WORK SUPPORT”.
Refer to 

DLK-49, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Set “ANTI KEY LOCK IN FUNCTI” setting in “WORK SUPPORT”.

2.

CHECK DOOR SWITCH

Check door switch.
Refer to 

DLK-63, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-56, "DTC Logic"

 (instrument center).

Refer to 

DLK-58, "DTC Logic"

 (console).

Refer to 

DLK-60, "DTC Logic"

 (luggage room).

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK UNLOCK SENSOR

Check unlock sensor.
Refer to 

DLK-87, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-38, "Intermittent Incident"

.

NO

>> GO TO 1.