Infiniti EX35. Manual - part 1564

WW-108

< ON-VEHICLE REPAIR >

FRONT WIPER DRIVE ASSEMBLY

FRONT WIPER DRIVE ASSEMBLY

Exploded View

INFOID:0000000003139019

REMOVAL

DISASSEMBLY

Removal and Installation

INFOID:0000000003139020

REMOVAL

1.

Remove front wiper arm. Refer to 

WW-106, "Removal and Installation"

.

2.

Remove cowl top cover. Refer to 

EXT-23, "Removal and Installation"

.

3.

Remove bolts from the front wiper drive assembly.

1.

Front wiper drive assembly

JPLIA0974ZZ

1.

Front wiper linkage 1

2.

Shaft seal

3.

Front wiper motor

4.

Front wiper frame

5.

Front wiper linkage 2

: Multi

−

purpose grease or an equivalent.

JPLIA0975ZZ

FRONT WIPER DRIVE ASSEMBLY

WW-109

< ON-VEHICLE REPAIR >

C

D

E

F

G

H

I

J

K

M

A

B

WW

N

O

P

4.

Disconnect the front wiper motor connector.

5.

Remove front wiper drive assembly from the vehicle.

INSTALLATION

1.

Install the front wiper drive assembly to the vehicle.

2.

Connect the front wiper motor connector.

3.

Operate the front wiper to move it to the auto stop position.

4.

Install the cowl top cover. Refer to 

EXT-23, "Removal and Installation"

.

5.

Install front wiper arms. Refer to 

WW-106, "Removal and Installation"

.

Disassembly and Assembly

INFOID:0000000003139021

DISASSEMBLY

1.

Remove the front wiper linkage 1 and 2 from the front wiper drive assembly.

CAUTION:

Do not bend the linkage or damage the plastic part of the ball joint when removing the wiper link-
age.

2.

Remove the front wiper motor mounting screws, and then remove the front wiper motor from the front
wiper frame.

ASSEMBLY

1.

Connect the front wiper motor connector.

2.

Operate the front wiper to move it to the auto stop position.

3.

Disconnect the front wiper motor connector.

4.

Install front wiper motor to front wiper frame.

5.

Install the front wiper linkage 2 to the front wiper motor and the front wiper frame.

6.

Install the front wiper linkage 1 to the front wiper frame.

CAUTION:

• Do not drop front wiper motor or cause it to come into contact with other parts.
• Be careful for the grease condition at the front wiper motor and front wiper linkage joint

(retainer). Apply Multi

−

purpose grease or an equivalent if necessary.

WW-110

< ON-VEHICLE REPAIR >

WIPER AND WASHER SWITCH

WIPER AND WASHER SWITCH

Exploded View

INFOID:0000000003464507

Refer to 

BCS-85, "Exploded View"

.

REAR WIPER ARM

WW-111

< ON-VEHICLE REPAIR >

C

D

E

F

G

H

I

J

K

M

A

B

WW

N

O

P

REAR WIPER ARM

Exploded View

INFOID:0000000003464509

Removal and Installation

INFOID:0000000003464510

REMOVAL

1.

Operate the rear wiper to the auto stop position.

2.

Remove the rear wiper arm cover.

3.

Remove the rear wiper arm mounting nut.

4.

Raise rear wiper arm, and remove wiper arm from the vehicle.

INSTALLATION

1.

Clean wiper arm mount as shown in the figure to prevent nut
from being loosened.

2.

Operate the rear wiper motor to the auto stop position.

3.

Adjust the rear wiper blade position. Refer to 

WW-111, "Adjust-

ment"

.

4.

Install the rear wiper arm by tightening the mounting nut.

5.

Inject the washer fluid.

6.

Operate the rear wiper to the auto stop position.

7.

Check that the rear wiper blades stop at the specified position.

8.

Install the rear wiper arm cover.

Adjustment

INFOID:0000000003464511

REAR WIPER BLADE POSITION ADJUSTMENT

Clearance between the end of back door glass and the top of wiper blade center.

1.

Rear wiper blade

2.

Rear wiper motor

3.

Pivot seal

4.

Rear wiper arm

5.

Rear wiper arm cover

Refer to 

GI-4, "Components"

 for symbols in the figure.

JPLIA0976GB

SKIA0082J