Infiniti EX35. Manual - part 1435

2. Line pressure test

3. Accelerator pedal position sensor

4. CAN communication line

5. High and low reverse clutch solenoid valve

TM-81

6. Control valve with TCM

OFF vehicle

7. Torque converter

8. Oil pump assembly

9. 3rd one-way clutch

TM-253

10. Gear system

11. High and low reverse clutch

19, "Cross-Sectional View"

12. Forward one-way clutch (Parts behind drum support is im-
possible to perform inspection by disassembly. Refer to

TM-

13. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to

TM-19,

"Cross-Sectional View"

While accelerating in
4th, engine races or
slippage occurs.

ON vehicle

1. A/T fluid level and state

2. Line pressure test

3. Accelerator pedal position sensor

4. CAN communication line

5. Input clutch solenoid valve

TM-78

6. Control valve with TCM

OFF vehicle

7. Torque converter

8. Oil pump assembly

9. Input clutch

10. Gear system

11. High and low reverse clutch

12. Direct clutch

TM-267

While accelerating in
5th, engine races or
slippage occurs.

ON vehicle

1. A/T fluid level and state

2. Line pressure test

3. Accelerator pedal position sensor

4. CAN communication line

5. Front brake solenoid valve

TM-79

6. Control valve with TCM

OFF vehicle

7. Torque converter

8. Oil pump assembly

9. Front brake (brake band)

10. Input clutch

11. Gear system

12. High and low reverse clutch

No.

Item

Symptom

Condition

Diagnostic item

Reference

page

SYSTEM SYMPTOM

TM-129

< SYMPTOM DIAGNOSIS >

[5AT: RE5R05A]

Slips/Will
Not En-
gage

Slips at lock-up.

ON vehicle

1. A/T fluid level and state

2. Line pressure test

3. Engine speed signal

TM-56

4. Turbine revolution sensor

TM-52

5. Torque converter clutch solenoid valve

TM-68

6. CAN communication line

7. Control valve with TCM

OFF vehicle

8. Torque converter

9. Oil pump assembly

No creep at all.

ON vehicle

1. A/T fluid level and state

2. Line pressure test

3. Accelerator pedal position sensor

4. Direct clutch solenoid valve

TM-80

5. PNP switch

6. CAN communication line

7. A/T position

(2WD),

(AWD)

8. Control valve with TCM

OFF vehicle

9. Torque converter

10. Oil pump assembly

19, "Cross-Sectional View"

11. 1st one-way clutch

12. Gear system

13. Reverse brake

14. Direct clutch

15. Forward one-way clutch (Parts behind drum support is im-
possible to perform inspection by disassembly. Refer to

TM-

16. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to

TM-19,

"Cross-Sectional View"

Vehicle cannot run in
all positions.

ON vehicle

1. A/T fluid level and state

2. Line pressure test

3. PNP switch

4. A/T position

(2WD),

(AWD)

5. Control valve with TCM

OFF vehicle

6. Oil pump assembly

7. Gear system

8. Output shaft

No.

Item

Symptom

Condition

Diagnostic item

Reference

page

TM-130

< SYMPTOM DIAGNOSIS >

[5AT: RE5R05A]

SYSTEM SYMPTOM

Slips/Will
Not En-
gage

With selector lever in
“D” position, driving is
not possible.

ON vehicle

1. A/T fluid level and state

2. Line pressure test

3. PNP switch

4. A/T position

(2WD),

(AWD)

5. Control valve with TCM

OFF vehicle

6. Torque converter

7. Oil pump assembly

8. 1st one-way clutch

TM-260

9. Gear system

10. Reverse brake

19, "Cross-Sectional View"

11. Forward one-way clutch (Parts behind drum support is im-
possible to perform inspection by disassembly. Refer to

TM-

12. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to

TM-19,

"Cross-Sectional View"

With selector lever in
“R” position, driving is
not possible.

ON vehicle

1. A/T fluid level and state

2. Line pressure test

3. PNP switch

4. A/T position

(2WD),

(AWD)

5. Control valve with TCM

OFF vehicle

6. Gear system

7. Output shaft

8. Reverse brake

Does Not
Change

Does not change M5

→

M4.

ON vehicle

1. PNP switch

2. A/T fluid level and state

3. A/T position

(2WD),

(AWD)

4. Manual mode switch

5. CAN communication line

6. Control valve with TCM

OFF vehicle

7. Front brake (brake band)

No.

Item

Symptom

Condition

Diagnostic item

Reference

page

SYSTEM SYMPTOM

TM-131

< SYMPTOM DIAGNOSIS >

[5AT: RE5R05A]

Does Not
Change

Does not change M4

→

M3.

ON vehicle

1. PNP switch

2. A/T fluid level and state

3. A/T position

(2WD),

(AWD)

4. Manual mode switch

5. CAN communication line

6. Control valve with TCM

OFF vehicle

7. Front brake (brake band)

8. Input clutch

Does not change M3

→

M2.

ON vehicle

1. PNP switch

2. A/T fluid level and state

3. A/T position

(2WD),

(AWD)

4. Manual mode switch

5. CAN communication line

6. Control valve with TCM

OFF vehicle

7. Front brake (brake band)

8. Input clutch

9. High and low reverse clutch

Does not change M2

→

M1.

ON vehicle

1. PNP switch

2. A/T fluid level and state

3. A/T position

(2WD),

(AWD)

4. Manual mode switch

5. CAN communication line

6. Control valve with TCM

OFF vehicle

7. Input clutch

8. High and low reverse clutch

9. Direct clutch

TM-267

Cannot be changed to
manual mode.

ON vehicle

1. Manual mode switch

2. Turbine revolution sensor

TM-52

3. CAN communication line