|
|
Content .. 1347 1348 1349 1350 ..
SRC-22 < COMPONENT DIAGNOSIS > B1011, B1012, B1013, B1014, B1015 DIAGNOSIS SENSOR UNIT B1011, B1012, B1013, B1014, B1015 DIAGNOSIS SENSOR UNIT Description INFOID:0000000003591722 DTC B1011, B1012, B1013, B1014, B1015 DIAGNOSIS SENSOR UNIT Detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the air OPERATION It detects a shock that exceeds specified level and monitors such systems as the driver and passenger air STRUCTURE It contains the “G” sensors for both frontal and side collisions and spare battery function in case of main bat- INSTALLATION Air bag diagnosis sensor unit is installed under the center console with fixed bolts. DTC Logic INFOID:0000000003591723 DTC DETECTION LOGIC With CONSULT-III DTC No. Index (“SELF-DIAG [CURRENT]”), (“SELF-DIAG [PAST]” or “TROUBLE DIAG RECORD”) DTC CONFIRMATION PROCEDURE (WITH CONSULT-III) 1. CHECK SELF-DIAG RESULT 1. Turn ignition switch ON. 2. Check the screen of CONSULT-III. Is malfunctioning part detected? YES >> Refer to NO >> INSPECTION END DTC CONFIRMATION PROCEDURE (WITHOUT CONSULT-III) NOTE: 1. CHECK AIR BAG WARNING LAMP 1. Turn ignition switch ON. 2. Check the air bag warning lamp status. Is malfunctioning part detected? YES >> Refer to warning lamp flash code chart. Refer to NO >> INSPECTION END Diagnosis Procedure INFOID:0000000003591724 WITH CONSULT-III WARNING: • Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait at least 3 minutes. (To discharge backup capacitor.) DTC No. Trouble diagnosis name DTC detecting condition Possible cause B1011 B1012 CONTROL UNIT Air bag diagnosis sensor unit is out of • Internal breakdown in air bag diag- nosis sensor unit • Mis-match between specification on vehicle and configuration in air bag |