Infiniti EX35. Manual - part 1073

SQUEAK AND RATTLE TROUBLE DIAGNOSES

MIR-47

< SYMPTOM DIAGNOSIS >

[WITH ADP]

C

D

E

F

G

H

I

J

K

M

A

B

MIR

N

O

P

PIIB8742E

MIR-48

< PRECAUTION >

[WITH ADP]

PRECAUTIONS

PRECAUTION

PRECAUTIONS

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT 
PRE-TENSIONER"

INFOID:0000000003136548

The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the “SRS AIRBAG” and “SEAT BELT” of this
Service Manual.

WARNING:

• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in

the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.

• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal

injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the “SRS AIRBAG”.

• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this

Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.

PREPARATION

MIR-49

< PREPARATION >

[WITH ADP]

C

D

E

F

G

H

I

J

K

M

A

B

MIR

N

O

P

PREPARATION

PREPARATION

Commercial Service Tools

INFOID:0000000003136549

Tool name

Description

Remover tool

Remove the clip and pawl and metal clip

PIIB7923J

MIR-50

< ON-VEHICLE REPAIR >

[WITH ADP]

INSIDE MIRROR

ON-VEHICLE REPAIR

INSIDE MIRROR

Exploded View

INFOID:0000000003691815

Base

Option

Removal and Installation

INFOID:0000000003691816

REMOVAL

Base model

1.

Inside mirror

2.

Mirror base

Refer to 

GI-4, "Components"

 for symbols in the figure.

JMLIA0145ZZ

1.

Inside mirror

2.

Mirror base

3.

Inside mirror cover

4.

Harness connector

5.

TORX bolt

Refer to 

GI-4, "Components"

 for symbols in the figure.

JMLIA0146GB