|
|
Content .. 1062 1063 1064 1065 ..
DOOR MIRROR REMOTE CONTROL SWITCH MIR-11 < COMPONENT DIAGNOSIS > [WITH ADP] C D E F G H I J K M A B MIR N O P COMPONENT DIAGNOSIS DOOR MIRROR REMOTE CONTROL SWITCH MIRROR SWITCH MIRROR SWITCH : Description INFOID:0000000003136529 It operates angle of the door mirror face. MIRROR SWITCH : Component Function Check INFOID:0000000003136530 1. CHECK MIRROR SWITCH FUNCTION Check the operation on “MIR CON SW–UP/DN” and “MIR CON SW–RH/LH” in “DATA MONITOR” mode Is the inspection result normal? YES >> Mirror switch function is OK. NO >> Refer to MIR-11, "MIRROR SWITCH : Diagnosis Procedure" . MIRROR SWITCH : Diagnosis Procedure INFOID:0000000003136531 1. CHECK MIRROR SWITCH INPUT SIGNAL 1. Turn ignition switch OFF. 2. Disconnect door mirror remote control switch connector. 3. Turn ignition switch ON. 4. Check voltage between door mirror remote control switch harness connector and ground. Is the inspection result normal? YES >> GO TO 3. NO >> GO TO 2. 2. CHECK MIRROR SWITCH CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect automatic drive positioner control unit connector. 3. Check continuity between automatic drive positioner control unit harness connector and door mirror Monitor item Condition MIR CON SW-UP/DN When operating the mirror switch toward the up or down side. : ON Other than above. : OFF MIR CON SW-RH/LH When operating the mirror switch toward the right or left side. : ON Other than above. : OFF (+) (–) Voltage (V) (Approx.) Door mirror remote control switch Connector Terminal D17 4 Ground 5 12 13 15 |