|
|
AV COMMUNICATION SIGNAL CIRCUIT (CONT-SAT) AV-69 < COMPONENT DIAGNOSIS > [BASE AUDIO WITHOUT NAVIGATION] C D E F G H I J K L M B A O P COMMUNICATION SIGNAL CIRCUIT (CONT-SAT) Description INFOID:0000000003508414 Satellite radio tuner and AV control unit are connected with a serial communication. They transmit the opera- Diagnosis Procedure INFOID:0000000003508415 1. CHECK CONTINUITY COMMUNICATION SIGNAL CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect satellite radio tuner connector and AV control unit connector. 3. Check continuity between satellite radio tuner harness connector and AV control unit harness connector. 4. Check continuity between satellite radio tuner harness connector and ground. Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector. 2. CHECK COMMUNICATION SIGNAL (SAT → CONT) 1. Connect satellite radio tuner connector and AV control unit connector. 2. Turn ignition switch ON. 3. Check signal between satellite radio tuner harness connector and ground. Is the inspection result normal? YES >> GO TO 3. NO >> Replace satellite radio tuner. 3. CHECK COMMUNICATION SIGNAL (CONT → SAT) Check signal between satellite radio tuner harness connector and ground. Satellite radio tuner AV control unit Continuity Connector Terminals Connector Terminals B236 9 M82 29 Existed 10 30 Satellite radio tuner Ground Continuity Connector Terminals B236 9 Not existed 10 (+) ( − ) Condition Reference value Satellite radio tuner Connector Terminal B236 9 Ground When satellite radio mode is SKIA9300J |