|
|
ADP-74 < COMPONENT DIAGNOSIS > SEAT MEMORY SWITCH SEAT MEMORY SWITCH Description INFOID:0000000003134701 Memory switch is equipped on the seat set switch and seat memory switch installed to the driver side door Component Function Check INFOID:0000000003134702 1. CHECK FUNCTION 1. Turn ignition switch ON. 2. Select “MEMORY SW 1”, “MEMORY SW 2” “SET SW” in “Data monitor” mode with CONSULT-III. 3. Check seat memory switch signal under the following conditions. Is the indication normal? YES >> INSPECTION END NO >> Perform diagnosis procedure. Refer to Diagnosis Procedure INFOID:0000000003134703 1. CHECK SEAT MEMORY SWITCH SIGNAL 1. Turn ignition switch OFF. 2. Disconnect seat memory switch connector. 3. Turn ignition switch ON. 4. Check voltage between seat memory switch harness connector and ground. Is the inspection result normal? YES >> GO TO 3. NO >> GO TO 2. 2. CHECK MEMORY SWITCH CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect automatic drive positioner control unit connector. 3. Check continuity between automatic drive positioner control unit harness connector and seat memory Monitor item Condition Status SET SW SET SW Push ON Release OFF MEMORY SW 1 Memory switch 1 Push ON Release OFF MEMORY SW 2 Memory switch 2 Push ON Release OFF (+) (–) Voltage (V) (Approx.) Seat memory switch Connector Terminal D5 3 Ground 5 1 2 |