|
|
ADP-62 < COMPONENT DIAGNOSIS > SLIDING SWITCH SLIDING SWITCH Description INFOID:0000000003134677 Sliding switch is equipped to the power seat switch on the seat cushion side surface. The operation signal is Component Function Check INFOID:0000000003134678 1. CHECK FUNCTION 1. Turn ignition switch ON. 2. Select “SLIDE SW-FR”, “SLIDE SW-RR” in “Data monitor” mode with CONSULT-III. 3. Check sliding switch signal under the following conditions. Is the indication normal? YES >> INSPECTION END NO >> Perform diagnosis procedure. Refer to Diagnosis Procedure INFOID:0000000003134679 1. CHECK SLIDING SWITCH SIGNAL 1. Turn ignition switch OFF. 2. Disconnect power seat switch connector. 3. Turn ignition switch ON. 4. Check voltage between power seat switch harness connector and ground. Is the inspection result normal? YES >> GO TO 3. NO >> GO TO 2. 2. CHECK SLIDING SWITCH CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect driver seat control unit connector. 3. Check continuity between driver seat control unit harness connector and power seat switch harness con- 4. Check continuity between driver seat control unit harness connector and ground. Monitor item Condition Status SLIDE SW-FR Sliding switch (forward) Operate ON Release OFF SLIDE SW-RR Sliding switch (backward) Operate ON Release OFF (+) (–) Voltage (V) (Approx.) Power seat switch Connector Terminal B459 11 Ground Battery voltage 26 Driver seat control unit Power seat switch Continuity Connector Terminal Connector Terminal B451 11 B459 11 Existed 26 26 |