|
|
01 SJC8A00J54460647109FEAT00 22-224 Power Windows Back Power Window Position Switch Test A B 1. Remove the rear panel trim (see page 20-69). 2. Disconnect the 2P connector (A) from the back power window position switch (B). 3. Check for continuity between the terminals. • There should be continuity between the No. 1 and No. 2 terminals when the back power • There should not be continuity between the No. 1 and No. 2 terminals when the back power 4. If the continuity is not as specified, replace the switch. |