|
|
Turn the ignition switch to ON (II). Within 5 seconds, turn the headlights to AUTO, then to ON, and then to AUTO again. Within 5 seconds, release the SELECT/RESET knob, then push and release the knob three times. 2. Once the gauge control module is in the self-diagnostic mode, press and hold the INFO button on the steering wheel for 5 seconds to get to the CUSTOMIZE MENU. 3. Use the INFO button to scroll through to the PAX RESET screen, then press the SEL/RESET button on the steering wheel. 4. Use the INFO button to scroll to the appropriate wheel, and then press the SEL/RESET button on the steering wheel to reset the PAX warning system display. The screen should read "PAX RESET 5. Use the INFO button to scroll through to EXIT, then press the SEL/RESET button. 6. Turn the ignition switch to OFF to exit the self-diagnostic mode. 2005-08 PILOT & RIDGELINE 2007-08 CR-V NOTE: If a flat tire is replaced with the spare tire, and the flat tire is stored in the cargo NOTE: When a tire pressure sensor is replaced or tires are rotated, the sensor ID must NOTE: On models equipped with PAX tire systems, if a tire is repaired or replaced, the NOTE: If a flat tire is replaced with the spare tire, and the flat tire is stored in the cargo NOTE: When a tire pressure sensor is replaced or tires are rotated, the sensor ID must
2007 Honda Element EX GENERAL INFORMATION Service Reminder Indicators - Honda
|