|
|
Specifications) 3. Install the lock cylinder in the reverse order of removal, and note these items: Replace the rod fastener if it is damaged. Make sure the cylinder switch connector is plugged in properly (if Make sure the trunk lid opens properly and locks securely. 4-DOOR 1. If equipped, remove the trunk lid trim (see TRIM REMOVAL/INSTALLATION - TRUNK LID ). 2. Disconnect the cylinder rod (A), and if equipped, disconnect the cylinder switch connector (B). Fig. 17: Identifying Cylinder Rod And Cylinder Switch Connector 3. Remove the bolt securing the lock cylinder (A). NOTE: Check for damaged or stress-whitened, rod fastener
2008 Honda Civic EX 2006-08 ACCESSORIES AND EQUIPMENT Openers - Civic
|