(see CRUISE CONTROL
INPUT TEST ). Test the cruise
control indicator signal input.
Vehicle does not
decelerate or
accelerate
accordingly
when the
set/decel or
resume/accel
switch is pressed
1. Check for PGM-FI DTCs (see
GENERAL
TROUBLESHOOTING
INFORMATION ).
2. Do the cruise control input test
(see CRUISE CONTROL
INPUT TEST ). Test the cruise
control set/decel, resume/accel
switch signal input.
3. Do the cruise control combination
switch test (see CRUISE
CONTROL COMBINATION
SWITCH
TEST/REPLACEMENT ).
Open circuit, loose
or disconnected
terminals:
YEL/RED, LT GRN
or LT GRN/BLK,
ORN
Set speed does
not cancel when
the brake pedal
is pressed
1. Check for PGM-FI DTCs (see
GENERAL
TROUBLESHOOTING
INFORMATION ).
2. Do the cruise control input test
(see CRUISE CONTROL
INPUT TEST ).
3. Test the brake pedal position
switch signal input. Do the brake
pedal position switch test (see
BRAKE PEDAL POSITION
SWITCH TEST ).
Short to power
on the BRN
wire
Faulty brake
pedal position
switch
Set speed does
not cancel
(engine rpm
stays high) when
the clutch pedal
1. Check for PGM-FI DTCs (see
GENERAL
TROUBLESHOOTING
INFORMATION ).
Short in the LT
BLU wire
Faulty clutch
pedal position
2008 Honda Civic LX
2006-08 ACCESSORIES & EQUIPMENT Cruise Control (K20Z3) - Civic (All Except Si)