|
|
Poor Returnability Lack of lubricant in ball joint or linkage Lubricate and service systems Binding in linkage or ball joints See STEERING LINKAGE and SUSPENSION article Improper front end alignment See WHEEL ALIGNMENT article Improper tire pressure Inflate to proper pressure Tie rod binding Inflate to proper pressure Shaft seal rubbing shaft See STEERING COLUMN article Excessive Vertical Motion Improper tire pressure Inflate to proper pressure Tires, wheels or rotors out of balance Balance tires then check wheels and rotors Worn or faulty shock absorbers Check and replace if necessary Loose tie rod ends or steering Tighten or replace if necessary Loose or worn wheel bearings See SUSPENSION article Steering Pulls to One Side Improper tire pressure Inflate to proper pressure Front tires are different sizes Rotate or replace if necessary Wheel bearings not adjusted properly See FRONT SUSPENSION article
2008 Honda Civic EX GENERAL INFORMATION Trouble Shooting - Basic Procedures
|