|
|
3. Drain the ATF (see step 3 ) through a strainer. Inspect the strainer for metal debris or excessive clutch material. Does the strainer have metal debris or excessive clutch material? YES -Replace the transmission, then go to step 14. NO -Replace the ATF (see step 5 ), then go to step 4. 4. Turn the ignition switch to ON (II). through all five gears. 7. Turn the ignition switch to LOCK (0). Repeat the test-drive in step 6, then go to step 8. 8. Monitor the OBD STATUS for P0776 or P0777 in the DTCs MENU with the HDS. Does the HDS indicate FAILED? YES -Go to step 9. NO -If the HDS indicates PASSED, intermittent failure, the system is OK at 9. Clear the DTC with the HDS. 10. Select Clutch Pressure Control (Linear) Solenoid Valve B in the Miscellaneous Test Menu, and test A/T clutch pressure control solenoid valve B with the Does the HDS indicate NORMAL? YES -Intermittent failure, the system is OK at this time. If the HDS indicates NO -Follow the instructions indicated on the HDS by the test result. If the
2008 Honda Civic LX 2006-08 TRANSMISSION Automatic Transmission - Civic (Except Hybrid)
|