|
|
General Principles GL-8 Protective Measures while Repairing To assure safety in repairing, the following protective measures should be taken all the way: 1) Before reparation, you should ensure that the wheels can not turn. The measure to lock wheels is as the sketch map. 2) Ensure that the gearbox is at neutral position. 3) Ensure that the ignition switch is at "off" postion. 4) When repairing electric circuit, the negative pole should be disconnected. 5) The jacks and brackets used should be strong enough for the load acting on them. Method of mounting brackets is as the sketch map. The supporting points of front axle for mounting jacks is as the sketch map. The supporting points of rear axle for mounting jacks is as the sketch map. 6) When disassemble or assemble the assemblies that have been taken down, you should ensure that they are on a solid worktable to Power steering gear Add between the upper and lower scale of oil tank Volume Data Part Volume (L) |