|
|
96 15 19 Removing and installing footwell light - as - Removing footwell light Removing footwell light Removing footwell light ATTENTION Danger of damage to property if bulbs are used or handled incorrectly! Risk of damage to bulbs and bulb housing. • → Switch off ignition and remove ignition key. → To prevent short circuits, the load in question must be switched off while changing bulbs. → Only bulbs specified in the bulb table may be used. → Bulbs with a higher wattage may damage the bulb housing. → New bulbs must be clean and free of grease. Therefore, never touch the bulbs with your bare hands. Use a cloth or soft paper when changing bulbs. → In certain states, it is compulsory to carry spare light bulbs. Installation Location: 4145 |