Porshe 911 (997). Manual - part 994

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  992  993  994  995   ..

 

 

Porshe 911 (997). Manual - part 994

 

 

- Preliminary work
- Removing servo motor for headlight levelling system
- Installing servo motor for headlight levelling system
- Subsequent work

Tools

Designation

Type

Number

Explanation

PIWIS Tester

special tool

9718

Preliminary work

Preliminary work - servo motor for headlight levelling system

1. Remove main headlight. → 941519 Removing and installing headlight - chapter on "Removing"

Removing cap of main headlight

Fastening screws for cap

4133

1. Unscrew four fastening screws -1- from the cap.

Releasing cap

2. Release cap once at the top and twice at the bottom -a- and remove from the main

headlight.

Removing servo motor for headlight levelling system

Removing servo motor for headlight levelling system

Unscrewing the two fastening screws

1. Unscrew the two fastening screws -1- for the servo motor.

Diagnostic system: reading out fault memory and activating systems

Removing cap of main headlight

4134

Disengaging ball head from servo motor for headlight

2. Slide servo motor vertically downwards and remove.

Disconnecting electric plug connection

3. Disconnect electrical plug connection from servo motor and remove the servo motor.

Installing servo motor for headlight levelling system

Installing servo motor for headlight levelling system

Note

After reinstallation or installation of a new servo motor for the headlight levelling system, the headlight must
be calibrated.

Connecting the electrical plug connection

1. Push electric plug onto the servo motor until it is felt to

engage.

Diagnostic system: reading out fault memory and activating systems

Removing servo motor for headlight levelling system

4135

Engaging ball head

2. Engage servo motor in the actuator for the main headlight and push servo motor

upwards.

Tightening the two fastening screws

3. Screw down the servo motor with the two fastening screws.

Subsequent work

Installing main headlight cap

Positioning cap

1.

Diagnostic system: reading out fault memory and activating systems

Installing servo motor for headlight levelling system

4136

 

 

 

 

 

 

 

Content   ..  992  993  994  995   ..