Porshe 911 (997). Manual - part 969

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  967  968  969  970   ..

 

 

Porshe 911 (997). Manual - part 969

 

 

Pour des raisons techniques, il ne peut pas être exclu à l'heure actuelle que, même
en cas d'affichage correct à l'écran, la correspondance entre le texte et l'illustration
puisse être erronée sur l'impression papier.

• 

Si l'erreur passe inaperçue, on court le risque d'exécuter certaines opérations de
manière incorrecte pouvant conduire à des dommages corporels et matériels.

• 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Subsequent work for parking light bulb

4033

94 31 19 Removing and installing tail light - as of MY
2005

- Removing tail light
- Installing tail light
- Information

Removing tail light

Removing tail light

Installation Location:

Installation position

4034

Unscrewing fastening screw

1. Unscrew the fastening screw -1- for the tail light.

Removing tail light from guide

2. Lift the tail light at the bottom and remove from the guide.

Releasing and pulling off connector

3. Release the electric central connector for the tail light -A- and pull it

off.

4. Remove tail light.

Installing tail light

Installing tail light

Diagnostic system: reading out fault memory and activating systems

Removing tail light

4035

Connecting connector

1. Push the central connector for the tail light together until the connector is felt to

engage.

2. Push the electric lead into the rear wing and insert the tail light into the guide.

Tightening fastening screw

3. Secure the tail light with the fastening screw -1- . → Tightening torque: 7.2 ftlb.

Information

Lamp overview: tail light

Diagnostic system: reading out fault memory and activating systems

Installing tail light

4036

 

 

 

 

 

 

 

Content   ..  967  968  969  970   ..