Porshe 911 (997). Manual - part 944

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  942  943  944  945   ..

 

 

Porshe 911 (997). Manual - part 944

 

 

Installing wiper link

1. If necessary, fit the wiper motor to the wiper link. → 921519 Removing and installing wiper motor -

chapter on "Installing"

Tightening order

2. Position wiper link in radiator tank and screw down the fastening screws -3A, 3B, 3,C- in turn. →

Tightening torque: 7.5 ftlb.

Installing dome strut

3. Lowre vehicle onto the wheels, position dome strut and screw down with the fastening screws -1, 2-

. → Tightening torque: 7 ftlb. → Tightening torque: 17 ftlb.

Subsequent work

Diagnostic system: reading out fault memory and activating systems

Installing wiper link

3933

Reworking wiper link

→ 508719 Removing and installing cowl panel cover - chapter on "Installing"
Left plenum chamber cover → 852219 Removing and installing cover - chapter on "Installing"
→ 922519 Removing and installing wiper arm - chapter on "installing"
Connect battery. → 271000  Work instructions after disconnecting the battery

997110, 997111, 997120, 997121, 997310, 997311, 997320, 997321, 997410, 997411, 997430, 997431,
997610, 997611, 997620, 997621

WARNUNG

Gefahr des Verlusts der Text-Bild-Zuordnung beim Ausdruck.

Aus technischen Gründen kann derzeit nicht ausgeschlossen werden, dass trotz
einwandfreier Darstellung auf dem Bildschirm beim Ausdruck der
Zusammenhang von Text und zugehörigem Bild verloren geht.

• 

Wird der Fehler nicht bemerkt, besteht die Gefahr, daß Arbeiten nicht korrekt
durchgeführt werden und es dadurch zu Personen- und Sachschäden kommt.

• 

→ Vergleichen Sie deshalb nach dem Druckvorgang unbedingt die Ausdrucke mit der
Bildschirmdarstellung. Korrigieren Sie die Ausdrucke im Fehlerfall so, daß der Inhalt der
Bildschirmdarstellung zutreffend wiedergegeben wird.

WARNING

Danger of losing text-figure correspondence when printing out.

For technical reasons, it can currently not be ruled out that the correspondence
between text and associated figure can be lost when it is printed out, even though
the display on the screen is correct.

• 

If the fault is not noticed, there is the danger that work will not be performed
correctly which can cause injury and damage.

• 

→ Therefore, always compare printouts with the screen display after printing them out. Correct
the printouts if they are faulty so that the content of the screen display matches that on the
printouts.

AVERTISSEMENT

Risque de perte de la correspondance texte-illustration lors de l'impression papier.

Pour des raisons techniques, il ne peut pas être exclu à l'heure actuelle que, même
en cas d'affichage correct à l'écran, la correspondance entre le texte et l'illustration
puisse être erronée sur l'impression papier.

• 

Diagnostic system: reading out fault memory and activating systems

Reworking wiper link

3934

Si l'erreur passe inaperçue, on court le risque d'exécuter certaines opérations de
manière incorrecte pouvant conduire à des dommages corporels et matériels.

• 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Reworking wiper link

3935

92 25 15 Adjusting wiper arm attack angle - as of MY
2005

- Preliminary work
- Adjusting wiper arm
- Subsequent work

Tools

Designation

Type

Number

Explanation

Adjustment device

special tool

9737

Preliminary work

Preliminary work for adjusting wiper arm attack angle

Note

The wiper arm attack angle will need to be checked and adjusted if the customer complains of: rubbing or
hesitation of wiper, noises when wiping or uneven wiping area.
It is important that the wiper blades are inspected for wear and the windscreen is free of contamination.

1. Check condition of windscreen and clean off any contamination.

2. Remove wiper blade. → 922719 Removing and installing wiper blade - chapter on "Removing"

3. Inspect condition of wiper blade and replace if necessary.

Adjusting wiper arm

3936

 

 

 

 

 

 

 

Content   ..  942  943  944  945   ..