|
|
When installing the adhesive pad, the temperature of the windscreen, rain sensor and adhesive pad • Do not touch the adhesive surface of the sensor with your fingers. • If the sensor is new, remove the protection cap before sticking the sensor on to the windscreen. • When sticking on a new sensor, make sure that no air pockets are caught between the gel and the • Sensor, orientation lights, wires and wiring ducts are spare parts. • Note If the removed rain sensor is to be reinstalled, the surfaces must be free of adhesive residues. Do not • Sticking on rain sensor 1. Press the rain sensor -6- onto the windscreen. Clipping in holder 2. Push and press holder -5- onto the rain sensor until it engages. Diagnostic system: reading out fault memory and activating systems Installing rain sensor 3921 |