Porshe 911 (997). Manual - part 877

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  875  876  877  878   ..

 

 

Porshe 911 (997). Manual - part 877

 

 

→ Therefore, always compare printouts with the screen display after printing them out. Correct
the printouts if they are faulty so that the content of the screen display matches that on the
printouts.

AVERTISSEMENT

Risque de perte de la correspondance texte-illustration lors de l'impression papier.

Pour des raisons techniques, il ne peut pas être exclu à l'heure actuelle que, même
en cas d'affichage correct à l'écran, la correspondance entre le texte et l'illustration
puisse être erronée sur l'impression papier.

• 

Si l'erreur passe inaperçue, on court le risque d'exécuter certaines opérations de
manière incorrecte pouvant conduire à des dommages corporels et matériels.

• 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Coding stopwatch

3665

- General warning notes
- Preliminary work
- Removing instrument cluster
- Installing instrument cluster
- Subsequent work
- Programming instrument cluster

Tools

Designation

Type

Number

Explanation

PIWIS Tester

special tool

9718

General warning notes

General warnings for instrument cluster

ATTENTION

Sudden voltage interruption of the power supply to the control module.

Destruction of the control module.

• 

→ During programming, it is essential to guarantee the power supply for the Porsche System tester. It is

essential to connect a battery charger with a current rating of at least 40 A to the vehicle battery.

→ Prior to disconnecting the control module, switch off the ignition and remove the ignition key.

3666

Preliminary work

Preliminary work for instrument cluster

Remove top steering-column panel. → 481319 21 Removing and installing trim panel - Removing

Removing instrument cluster

Removing instrument cluster

Installation Location:

Installation position

1. If a new instrument cluster should be installed, read out the values if possible from the instrument cluster.

→  25 Removing and installing instrument cluster - programming

2. Loosen the steering wheel adjustment, put the steering wheel in the front-most and lowest position and

lock the steering wheel adjustment.

Diagnostic system: reading out fault memory and activating systems

 Preliminary work

3667

Unscrewing fastening screws

3. Unscrew the two fastening screws -1- .

Unlocking the electric connector

4. The instrument cluster is also secured in the dashboard with two retaining clips. Therefore, pull the

instrument cluster abruptly forward and if necessary push instrument cluster away from dashboard from
underneath.

5. Release electrical connector on instrument cluster -A- and unplug it.

6. Pull out instrument cluster at the sides and to the left.

Installing instrument cluster

Installing instrument cluster

Diagnostic system: reading out fault memory and activating systems

Removing instrument cluster

3668

 

 

 

 

 

 

 

Content   ..  875  876  877  878   ..