Porshe 911 (997). Manual - part 689

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  687  688  689  690   ..

 

 

Porshe 911 (997). Manual - part 689

 

 

→ Therefore, always compare printouts with the screen display after printing them out. Correct
the printouts if they are faulty so that the content of the screen display matches that on the
printouts.

AVERTISSEMENT

Risque de perte de la correspondance texte-illustration lors de l'impression papier.

Pour des raisons techniques, il ne peut pas être exclu à l'heure actuelle que, même
en cas d'affichage correct à l'écran, la correspondance entre le texte et l'illustration
puisse être erronée sur l'impression papier.

• 

Si l'erreur passe inaperçue, on court le risque d'exécuter certaines opérations de
manière incorrecte pouvant conduire à des dommages corporels et matériels.

• 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Reading and writing values for AWS control unit

2913

69 72 01 Checking roll-over protection system - as of
MY 2005

- Preliminary work
- General warning notes
- Subsequent work

Tools

Designation

Type

Number

Explanation

PIWIS tester

special tool

9718

Preliminary work

Preliminary work

1. Fully open the convertible top.

General warning notes

Safety instructions for work on the roll-over protection system

ATTENTION

Danger of injury when working on the roll-over protection system!

→ The movement range of the roll-over protection system must be kept clear.

→ Work on the roll-over protection system must only be performed with the ignition key withdrawn.

2914

→ Attention: Do not begin assembly work until after a waiting time of 1 minute has elapsed.

→ Tools or other objects must not be placed in the extension area of the roll-over protection system.

→ Remove the roll-over bar modules only after the roll-over bar has been extended (triggered).

It is not permissible to perform repairs on the roll-over bar modules.
The roll-over bar modules must be replaced in the event of visible damage or pressure marks.
After assembly work on the roll-over protection system - but at least every 2 years - the function of the
roll-over protection system must be tested by triggering it via the diagnostic interface of the PIWIS tester
9718

.

Only perform the function test on the roll-over protection system with the hardtop and cap removed and the
convertible top open.

Checking roll-over bar

Checking roll-over protection system

Note

Actuate the roll-over protection system only if:

the hardtop is removed

• 

the convertible top is open

• 

the caps are removed

• 

1. Connect the PIWIS tester 9718 to the diagnostic socket. Switch on ignition. Select menu item

"Roll-over protection", and select menu item "Drive links" in the command line which then
appears. Press the key combination described in the Tester; the roll-over protection system triggers.

Diagnostic system: reading out fault memory and activating systems

Safety instructions for work on the roll-over protection system

2915

Pressing in the roll-over bar

2. Press locking levers outward -Arrow A- and press in the roll-over bar -1- -Arrow B- until it is felt to

engage -inset- .

Subsequent work

Subsequent work

1. Install

caps.

2. Close convertible top.

997310, 997311, 997320, 997321, 997611, 997620, 997621

WARNUNG

Gefahr des Verlusts der Text-Bild-Zuordnung beim Ausdruck.

Aus technischen Gründen kann derzeit nicht ausgeschlossen werden, dass trotz
einwandfreier Darstellung auf dem Bildschirm beim Ausdruck der
Zusammenhang von Text und zugehörigem Bild verloren geht.

• 

Wird der Fehler nicht bemerkt, besteht die Gefahr, daß Arbeiten nicht korrekt
durchgeführt werden und es dadurch zu Personen- und Sachschäden kommt.

• 

Diagnostic system: reading out fault memory and activating systems

Checking roll-over bar

2916

 

 

 

 

 

 

 

Content   ..  687  688  689  690   ..