|
|
Pushing connector onto the mirror adjusting motor 1. Push connector onto mirror adjusting motor until it is felt to engage. Screwing down fastening screws on the mirror adjusting motor 2. Insert mirror adjusting motor and screw down the three fastening screws -1- . 3. Switch on ignition and check function of the mirror adjusting motor. Subsequent work Subsequent work Install mirror glass. → 667819 23 Removing and reinstalling mirror glass - chapter on "Installing" 997110, 997111, 997120, 997121, 997310, 997311, 997320, 997321, 997410, 997411, 997430, 997431, WARNUNG Gefahr des Verlusts der Text-Bild-Zuordnung beim Ausdruck. Aus technischen Gründen kann derzeit nicht ausgeschlossen werden, dass trotz • Wird der Fehler nicht bemerkt, besteht die Gefahr, daß Arbeiten nicht korrekt • → Vergleichen Sie deshalb nach dem Druckvorgang unbedingt die Ausdrucke mit der Diagnostic system: reading out fault memory and activating systems Installing mirror adjuster motor 2681 |