Porshe 911 (997). Manual - part 619

Removing roof joint clips

3. Between the roof joint clip -1- and the roof joint cover strip -2- insert a narrow screwdriver -3- and press

outwards until the roof joint clip disengages.

Assembling roof joint cover strip

Assembling roof joint cover strip

Installation Location:

Installation position of roof joint cover strip

Diagnostic system: reading out fault memory and activating systems

 Assembling roof joint cover strip

2633

Fitting roof joint clips

1. Insert roof joint clips -1- narrow side first, and press in until the locking tab in the roof joint cover strip -2-

engages.

Fitting roof joint seal

2. Push the roof joint seal -1- onto the roof joint strip -2- all the way

round.

3. Stick in the roof frame seal -1- at the ends of the roof joint cover strip -2- using Loctite 241 .

Fitting fold-out element

4. Position the fold-out element -1- in the cut-out of the roof joint strip -2- , and press in the locking tabs

at the ends until they engage.

Installing roof joint strip

Diagnostic system: reading out fault memory and activating systems

Assembling roof joint cover strip

2634

Installing roof joint cover strip

Installation Location:

Installation position of roof joint cover strip

Fitting spreader

1. Position spreaders -1- (5 per roof channel) in the recesses, beginning at the front. Press the spreader right

down into the roof channel.

2. Push wedge piece into the spreader -1- until the spreader is braced in the roof channel.

Installing roof joint cover strip

3.

Diagnostic system: reading out fault memory and activating systems

Installing roof joint cover strip

2635

Position the roof joint strip -1- on the roof channel, and align the roof joint clips -2- in the roof joint
cover strip with the spreaders -3- so that they lie directly above one another.

4. Press in roof joint cover strip -1- until it audibly engages.

997110, 997111, 997120, 997121, 997410, 997411, 997430, 997431

WARNUNG

Gefahr des Verlusts der Text-Bild-Zuordnung beim Ausdruck.

Aus technischen Gründen kann derzeit nicht ausgeschlossen werden, dass trotz
einwandfreier Darstellung auf dem Bildschirm beim Ausdruck der
Zusammenhang von Text und zugehörigem Bild verloren geht.

• 

Wird der Fehler nicht bemerkt, besteht die Gefahr, daß Arbeiten nicht korrekt
durchgeführt werden und es dadurch zu Personen- und Sachschäden kommt.

• 

→ Vergleichen Sie deshalb nach dem Druckvorgang unbedingt die Ausdrucke mit der
Bildschirmdarstellung. Korrigieren Sie die Ausdrucke im Fehlerfall so, daß der Inhalt der
Bildschirmdarstellung zutreffend wiedergegeben wird.

WARNING

Danger of losing text-figure correspondence when printing out.

For technical reasons, it can currently not be ruled out that the correspondence
between text and associated figure can be lost when it is printed out, even though
the display on the screen is correct.

• 

If the fault is not noticed, there is the danger that work will not be performed
correctly which can cause injury and damage.

• 

→ Therefore, always compare printouts with the screen display after printing them out. Correct
the printouts if they are faulty so that the content of the screen display matches that on the
printouts.

AVERTISSEMENT

Risque de perte de la correspondance texte-illustration lors de l'impression papier.

Pour des raisons techniques, il ne peut pas être exclu à l'heure actuelle que, même
en cas d'affichage correct à l'écran, la correspondance entre le texte et l'illustration
puisse être erronée sur l'impression papier.

• 

Si l'erreur passe inaperçue, on court le risque d'exécuter certaines opérations de
manière incorrecte pouvant conduire à des dommages corporels et matériels.

• 

Diagnostic system: reading out fault memory and activating systems

Installing roof joint cover strip

2636