Porshe 911 (997). Manual - part 564

Removing centre retaining strip

Installation Location:

Overview, rear bumper

Removing centre retaining strip

1. Screw off fastening nuts -1- and remove centre retaining strip -2- . Check sheetmetal nuts -3- ,

replace if necessary.

Removing centre heat shield

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Removing centre retaining strip

2413

Overview, rear bumper

Removing centre heat shield

1. Screw off fastening nuts -1- and remove centre heat shield -2- .

Removing heat shield at the sides

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Removing centre heat shield

2414

Overview, rear bumper

Removing heat shield at the sides

1. Screw off fastening nuts -1- , fastening screws -2- and remove heat shield at the sides -3- .

Checking anti-chafing film

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Removing heat shield at the sides

2415

Overview, rear bumper

Checking anti-chafing film

Note

Make sure that the anti-chafing film completely seals off the cutout of the sheetmetal nut.

1. Check anti-chafing film -1- , replace if necessary .

2. Check sheetmetal nut -2- , replace if

necessary.

Installing rear bumper

Installing heat shield at the sides

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Checking anti-chafing film

2416