|
|
Installing microswitch 1. Insert microswitch for roof -1- from above -Arrow A- into the front lock -2- . Note New circlips must always be used when securing the microswitch. 2. Fit circlips -3- from above -Arrow B- and press in until they connect fully with the roof microswitch -1- . Subsequent work Subsequent work 1. Install front lock. → 610519 Removing and installing front lock - section on 2. Install operator control unit for garage door opener. → 967819 Removing and installing operator control unit for garage door opener - section on "Installing" 3. Install interior light. → 962255 23 Replace bulb for interior light - chapter on "Installing" 4. Close convertible top. 997310, 997311, 997320, 997321, 997610, 997611, 997620, 997621 Diagnostic system: reading out fault memory and activating systems Installing microswitch for roof 2277 |