|
|
Lid service position Note The height adjusting nut is set to its basic setting at the factory. This setting should not be changed. 1. Insert Allen key into the emergency operation mechanism and turn it counterclockwise (in direction of arrow) until the flap lid starts to move vertically. Installing rear side section flap 2. Introduce rear side panel flap -1- into top of frame for roll-over protection system -3- -Arrow A- , then swing it inwards -Arrow B- and insert it into the pins -2- -Arrow C- . Diagnostic system: reading out fault memory and activating systems Installing rear side section flap 2265 |