Porshe 911 (997). Manual - part 509

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  507  508  509  510   ..

 

 

Porshe 911 (997). Manual - part 509

 

 

materiales.

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Subsequent work

2193

- Preliminary work
- Removing the rear hardtop locking element
- Installing the rear hardtop locking element
- Subsequent work

Preliminary work

Preliminary work

Note

Only for removal of the rear left hardtop locking mechanism.

Remove hardtop. → 610219 Removing and installing hardtop - chapter on "Removing"

Removing the rear hardtop locking element

Removing rear hardtop locking mechanism

Installation Location:

2194

Installation position of rear hardtop locking mechanism

Unscrewing support for centring peg

Note

Only for removal of the rear left hardtop locking mechanism.

1. Undo fastening screw -1- and remove support for centring peg

-2-

 .

Unclipping lining at the sides

Note

Only for removal of the rear left hardtop locking mechanism.

Diagnostic system: reading out fault memory and activating systems

Removing rear hardtop locking mechanism

2195

2. Unclip lining -1- at the sides from the hardtop body

-2-

 .

Disconnecting rear window heating

Note

Only for removal of the rear left hardtop locking mechanism.

3. Drill out tubular rivet -1- , disconnect electric plug connection for rear window heating -2- and remove

wiring harness -3- from hardtop body -4- .

Unclipping trim panel

4. Unclip trim panel -1- for the rear hardtop locking mechanism upwards.

Releasing rear hardtop locking mechanism

5. Loosen fastening screw -1- for the rear hardtop locking mechanism -2- by approx. two turns and then

loosen fully by hand (approx. eight turns).

6. Unscrew fastening screws -3- and remove hardtop locking mechanism -2- from hardtop body.

Diagnostic system: reading out fault memory and activating systems

Removing rear hardtop locking mechanism

2196

 

 

 

 

 

 

 

Content   ..  507  508  509  510   ..