Porshe 911 (997). Manual - part 497

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  495  496  497  498   ..

 

 

Porshe 911 (997). Manual - part 497

 

 

risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.
Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Installing hardtop

2145

1.1. Lift up the cover strip -1- at left and right using a plastic spatula and pull it off. The roof strip clips are

destroyed on removal.

2. Place outer roof panel of hardtop on the assembly fixture.

Unclipping linings

3. Unclip

linings.

3.1. Unclip linings -1- front and rear from hardtop -2- .

Detaching seal at sides of roof frame

4. Detach seal at sides of roof frame.

4.1. The seal at the sides of the roof frame -1- is in two parts. Pull the upper seal -2- out of the profile of the

retaining strip -3- .

4.2. Unscrew fastening screws -4- from the retaining strip

-3-

 .

4.3. Remove the seal below together with the retaining strip -5- from the roof frame -1-

.

Detaching seal at sides of roof frame

5. Loosen and detach retaining strip and roof frame seal.

Diagnostic system: reading out fault memory and activating systems

Disassembling hardtop

2147

5.1. Unscrew tapping screws -1- from retaining strip -2- .

5.2. Unscrew pan-head screw -3- from the roof frame seal, detach the seal at the corners and remove it.

Pulling off sealing rubber

6. Pull off sealing rubber.

6.1. Pull off the surrounding sealing rubber -1- to the rear and pull it out at the ends from the roof frame seal

-2-

 .

Detaching roof liner at front

7. Detach roof liner at front.

7.1. Lift front retaining strip -1- of roof liner -2- with a plastic spatula and pull it off.

Detaching roof liner at sides

8. Detach roof liner at sides.

8.1. Lift up the roof liner -1- on the left and right sides with a plastic spatula and disengage from the

sheetmetal clips -2- .

Diagnostic system: reading out fault memory and activating systems

Disassembling hardtop

2148

 

 

 

 

 

 

 

Content   ..  495  496  497  498   ..