Porshe 911 (997). Manual - part 462

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  460  461  462  463   ..

 

 

Porshe 911 (997). Manual - part 462

 

 

risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.
Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Reworking

2005

Remove rubber seal for door. → 576519 Removing and installing rubber seal for door -
removing

12. Remove window channel seal. → 644819 Removing and installing front window channel seal - chapter on

"Removing"

13. Remove crash support. → 574819 Removing and installing crash support - chapter on "Removing"

General warning notes

Safety instructions for door

ATTENTION

Material damage! Incorrect installation of the door lock!

Danger of material damage if the door lock is installed incorrectly! Malfunctions in the alarm
system!

• 

→ The door lock should be installed only when the actuating lever is in basic

position!

ATTENTION

Damage to plug connection lugs during door removal!

Damage to plug connection lugs during door removal! Damage to lugs when pulling the plug
connection out of the A-pillar!

• 

→ The locking element at the bottom part of the plug connection must be pulled out before the plug

connection is disconnected!

ATTENTION

Damage to the bowden cable when removing door trim panel!

Damage to the bowden cable when removing door trim panel! Damage by bending the bowden
cable at the hook!

• 

→ Pull the hook out of the end piece only after installation in the inner door

release!

Diagnostic system: reading out fault memory and activating systems

Preliminary work

2007

ATTENTION

Danger of injury! Malfunction of the door window!

There is a danger of injury if fingers or hands are trapped by the door window when the
comfort function is triggered: lower and raise door window!

• 

→ When carrying out assembly work in the area of the connection piece, the door handle and the door

lock, the fuse No. 1 in row D must be removed!

Tools and materials

Tools and materials

Wheel mounting trolley with optional door mount

Wheel mounting trolley Master Wheel 50 with optional door mount, see Gr. 4; Workshop Equipment
Manual 00000

Disassembling door

Diagnostic system: reading out fault memory and activating systems

Safety instructions for door

2008

 

 

 

 

 

 

 

Content   ..  460  461  462  463   ..