|
|
Disassembling door handle 1. Press out circlip -1- , pull pin -2- out of the handle and remove actuating shaft -3- . 2. Pull pin rod -4- out of the handle liner -9- and separate handle -8- from the handle liner. 3. Remove return spring -6- , eccentric -5- and sleeve -7- . 4. Pull buffer -10- out of the handle -8- , check it and replace if necessary. Assembling door handle Assembling door handle Assembling door handle 1. Fasten buffer -10- to handle 2. Position return spring -6- , eccentric -5- , sleeve -7- and handle -8- on the handle liner -9- and press in pin rod -4- . 3. Position actuating shaft -3- on handle. Insert pin -2- and secure pin with the circlip -1- . Subsequent work Diagnostic system: reading out fault memory and activating systems Disassembling door handle 1945 |