Porshe 911 (997). Manual - part 435

Overview, rear lid

Removing upper part of spoiler

1. Press out plastic plugs -8- with a small screwdriver.

2. Unscrew clamping screw -9- by 2 to 3 turns and remove spoiler -10- by pulling it upwards.

Removing the folding wall from the upper part of the spoiler

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Removing upper part of spoiler

1897

Overview, rear lid

Removing the folding wall from the upper part of the spoiler

1. Press out the expanding rivet -11- .

2. Remove the rails -12- from the lower part of the spoiler towards the rear.

Removing the folding wall from the cover

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Removing the folding wall from the upper part of the spoiler

1898

Overview, rear lid

Removing the folding wall from the cover

1. Press out the clamping washer -13- with a screwdriver. The clamping washers are destroyed by the action

of removing them.

2. Remove the fastening rail -14- and the folding wall -15- from the cover towards the rear.

Removing the lower part of the spoiler

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Removing the folding wall from the cover

1899

Overview, rear lid

Removing the lower part of the spoiler

1. Unscrew the fastening nuts -16- from the upper part of the spoiler and the hinge -17- . Remove the

threaded plate -18- .

2. Unscrew the fastening screws -19- from the lower part of the spoiler and the actuating element. Remove

the spacer -20- .

Removing hinge

Installation Location:

Diagnostic system: reading out fault memory and activating systems

Removing the lower part of the spoiler

1900