|
|
Installing rear cover- front section 1. Insert rear underbody cover -4- . 2. Tighten fastening screws -2- . Tightening torque → : 1.5 ftlb. 3. Tighten fastening nuts -3- . Tightening torque → : 1.5 ftlb. Installing cover for rear underbody- rear section Installation Location: Overview, cover for rear underbody Note When pushing in the underside panel, make sure the overlap is correct. Diagnostic system: reading out fault memory and activating systems Installing cover for rear underbody- front section 1669 |