|
|
Subsequent work for body repairs 1. Removing vehicle from straightening bench 2. Cleaning spot-welded joints and sheetmetal flanges with a wire brush 3. Priming flange areas with 2K primer 4. Restore standard sealing with body sealant → 501000 Seam seal 5. Restore standard undersealing with underbody sealant 6. Painting repair area and adjacent surfaces, if necessary 7. Install removed add-on parts in the repair area 8. Apply cavity preservation. 997110, 997111, 997120, 997121, 997410, 997411, 997430, 997431 WARNUNG Gefahr des Verlusts der Text-Bild-Zuordnung beim Ausdruck. Aus technischen Gründen kann derzeit nicht ausgeschlossen werden, dass trotz • Wird der Fehler nicht bemerkt, besteht die Gefahr, daß Arbeiten nicht korrekt • → Vergleichen Sie deshalb nach dem Druckvorgang unbedingt die Ausdrucke mit der WARNING Danger of losing text-figure correspondence when printing out. For technical reasons, it can currently not be ruled out that the correspondence • If the fault is not noticed, there is the danger that work will not be performed • → Therefore, always compare printouts with the screen display after printing them out. Correct Diagnostic system: reading out fault memory and activating systems Subsequent work for body repairs 1565 |