|
|
Installing thread for belt fastening Note When butt welding body sheet panels with a sheet thickness of > 1.5 mm, there must be a welding slit width s Welding in viewing window 1. Weld in viewing window 1.1. Weld the replacement viewing window into the inner lower side member in area A with a continuous butt weld under shielding gas. Subsequent work Subsequent work after repair of threaded bushing for belt fastening 1. Cleaning spot-welded joints and sheetmetal flanges with a wire brush 2. Priming flange areas with 2K primer 3. Painting repair area and adjacent surfaces, if necessary 4. Apply cavity preservation. 5. Install removed accessories in the repair area 997110, 997111, 997120, 997121, 997310, 997311, 997320, 997321, 997410, 997411, 997430, 997431, Diagnostic system: reading out fault memory and activating systems Installing thread for belt fastening 1541 |