|
|
Fasten wheel housing liner part B 1. Insert wheel housing liner -B- . 2. Screw in fastening screws -2- and tighten → Final tightening: 2 (1.5) Nm (ftlb.) . 3. Screw in fastening screws -3- and tighten → Final tightening: 2.8 (1.8) Nm (ftlb.) . Installing front wheel housing liner - rear section Installation Location: Installation position of front wheel housing liner Note Push in wheel housing liner toward the outside up to contact in wing stop position. • Ensure that the right wheel housing liner is guided through the opening on the wheel well. • Diagnostic system: reading out fault memory and activating systems Install front wheel housing liner - front section 1449 |