Porshe 911 (997). Manual - part 279

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  277  278  279  280   ..

 

 

Porshe 911 (997). Manual - part 279

 

 

Danger of losing text-figure correspondence when printing out.

For technical reasons, it can currently not be ruled out that the correspondence
between text and associated figure can be lost when it is printed out, even though
the display on the screen is correct.

• 

If the fault is not noticed, there is the danger that work will not be performed
correctly which can cause injury and damage.

• 

→ Therefore, always compare printouts with the screen display after printing them out. Correct
the printouts if they are faulty so that the content of the screen display matches that on the
printouts.

AVERTISSEMENT

Risque de perte de la correspondance texte-illustration lors de l'impression papier.

Pour des raisons techniques, il ne peut pas être exclu à l'heure actuelle que, même
en cas d'affichage correct à l'écran, la correspondance entre le texte et l'illustration
puisse être erronée sur l'impression papier.

• 

Si l'erreur passe inaperçue, on court le risque d'exécuter certaines opérations de
manière incorrecte pouvant conduire à des dommages corporels et matériels.

• 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

Diagnostic system: reading out fault memory and activating systems

Test

1273

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Test

1274

- Preliminary work
- General warning notes
- Removal
- Installing
- Subsequent work

Preliminary work

→ 440519 Removing and installing wheel

General warning notes

Danger of accidents

WARNING

Risk of accidents if brake pads with the wrong brake pad quality are installed.

This can result in longer braking distances and more wear.

• 

→ Use only the type-specific brake pads specified in the Porsche Spare Parts Catalogue.

ATTENTION

Increased risk of accidents if old parts are fitted on brake calliper.

This can cause malfunctions.

• 

→ Fit new expanding spring, new retainer pin and new retainer on the brake calliper.

1275

Removal

Removing front disc brake pads

Removing retainer pin

1. Remove the safety bracket and extract the retainer pin

inwards.

2. Pull out the warning contact wire on the brake calliper and remove the warning contacts from the brake

pad plates.

3. Remove brake pads using the brake pad puller. Always observe the following important

points:

Press the brake pads back as far as possible using the piston resetting fixture.
Pull out brake pads together with the vibration dampers. If this is not possible (depending on the amount of
wear on the brake pads), use a spatula to detach the vibration dampers from the brake pad backing plate before
removing the pads.

Installing

Installing front disc brake pads

WARNING

Risk of accidents if brake pads with the wrong brake pad quality are installed.

Diagnostic system: reading out fault memory and activating systems

 Removal

1276

 

 

 

 

 

 

 

Content   ..  277  278  279  280   ..