|
|
Releasing torque converter Fixing pin for crankshaft 1. Turn engine clockwise until one of the bores (U4, U5, or U6, marked on belt pulley) in the belt pulley is aligned with the centring bore in the crankcase and fixing pin 95951 (short) can be Assembly aid for converter screw 2. Insert assembly aid 95960 in starter opening and fix with screw. 3. Unscrew 2 screws (hexagon socket 6 mm) of converter screw through openings in assembly aid 4. Remove fixing pins 95951 (short), continue to turn engine clockwise 120° and insert fixing pins 95951 (short) again. 5. Unscrew 2 screws (hexagon socket 6 mm) of converter screw through openings in assembly aid 6. Remove fixing pins 95951 (short), continue to turn engine clockwise 120° and insert fixing pins 95951 (short) again. 7. Unscrew 2 screws (hexagon socket 6 mm) of converter screw through openings in assembly aid 8. Remove fixing pins 95951 (short). 9. Remove assembly aid Diagnostic system: reading out fault memory and activating systems Releasing torque converter 1001 |