|
|
Cable duct 2. Remove cable duct. To do this, undo the screws and move the cable duct towards the engine. 3. Attach transmission to workshop crane. 4. Unscrew eight connecting bolts between the engine and transmission and pull out the transmission to the rear. Refitting transmission Refitting transmission 1. Attach transmission to workshop crane. Connecting screws 2. Refit transmission and screw in connecting bolts. Location Explanation Type Basic Tolerance 1 Tolerance 2 Transmission/engine Hexagon-head bolt no. 1 in Tightening 85 (63) Nm (ftlb.) Transmission/engine Hexagon-head bolt no. 2 in Tightening 85 (63) Nm (ftlb.) Transmission/engine Hexagon-head bolt no. 3 in Tightening 85 (63) Nm (ftlb.) Diagnostic system: reading out fault memory and activating systems Removing transmission 941 |