|
|
6. If the gaps look correct, screw down the cowl panel cover at its three fastening points in the area of the windscreen to the specified tightening torque. → Tightening torque: 4.0 (3.0 ftlb.) Nm → 7. Remove battery cover and tighten the two fastening screws of the cowl panel cover (to rear of battery) to the specified tightening torque. → Tightening torque: 2.0 (1.5 ftlb.) Nm 8. Tighten fastening screws for telephone antenna holder. 9. Fit cowl panel cover and battery cover as described. 997110, 997111, 997120, 997121, 997310, 997311, 997320, 997321, 997410, 997411, 997430, 997431, WARNUNG Gefahr des Verlusts der Text-Bild-Zuordnung beim Ausdruck. Aus technischen Gründen kann derzeit nicht ausgeschlossen werden, dass trotz • Wird der Fehler nicht bemerkt, besteht die Gefahr, daß Arbeiten nicht korrekt • → Vergleichen Sie deshalb nach dem Druckvorgang unbedingt die Ausdrucke mit der WARNING Danger of losing text-figure correspondence when printing out. For technical reasons, it can currently not be ruled out that the correspondence • If the fault is not noticed, there is the danger that work will not be performed • → Therefore, always compare printouts with the screen display after printing them out. Correct AVERTISSEMENT Risque de perte de la correspondance texte-illustration lors de l'impression papier. Diagnostic system: reading out fault memory and activating systems Reworking if cowl panel cover deformed 805 |