Porshe 911 (997). Manual - part 161

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  159  160  161  162   ..

 

 

Porshe 911 (997). Manual - part 161

 

 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Subsequent work - battery

801

27 12 19 Removing and installing battery cover - as
of MY 2005

- Removing battery cover
- Installing battery cover
- Subsequent work

Removing battery cover

Removing battery cover

1. Open luggage compartment.

Opening turn-lock fasteners

2. Twist turn-lock fasteners of cover 90° to the right, lift up with cover and disengage from cowl panel

cover.

3. Place battery cover on a level surface.

Installing battery cover

802

Installing battery cover

Engaging battery cover

1. Engage battery cover with external hooks in left and right mounting points of cowl panel cover.

2. Insert battery cover as far as it will go by pivoting it inward and applying simultaneous

pressure

 in direction of windscreen.

3. Align turn-lock fasteners fore-and-aft and engage by pressing down

lightly.

4. Locate locking hooks at the connecting flanges with the plenum panel side covers by pressing down

lightly.

5. Check gap dimension of battery cover; if necessary, rework the cowl panel covers or adjust the covers of

battery, cowl panel, plenum panel so that they mate. → 271219 Removing and installing battery cover -
chapter on "Reworking"

Subsequent work

Reworking if cowl panel cover deformed

Possible causes for difficulty in fitting battery cover:

Diagnostic system: reading out fault memory and activating systems

Installing battery cover

803

Deformation of cowl panel cover

–  A deformed connecting flange on the cowl panel cover or a cowl panel cover installed twisted.

1. Loosen all threaded joints of cowl panel cover.

→ 508719 Removing and installing cowl panel cover - chapter on "Removing"

2. Loosen antenna holder fastening screws.

3. Mask off the Velcro connection for plenum panel cover on left and right using commercially

available adhesive tape.

Greasing the hook of the battery cover

Note

Lightly grease the hook of the battery cover with the following grease, Part No. 000.043.204.68.

4. Fit the battery cover as follows:

4.1. Engage battery cover with external hooks in left and right mounting points of cowl panel cover.

4.2. Insert battery cover as far as it will go by screwing in and applying simultaneous pressure in direction

of windscreen.

4.3. Do not engage turn-lock fasteners.

4.4. Release tension from the entire set of covers (covers: plenum panel, battery, cowl panel) by sideways

shifting. Make sure there is no warping in the area where the plenum panel adjoins the luggage
compartment seal.

4.5. Align turn-lock fasteners fore-and-aft and engage by pressing down lightly.

5. If the battery cover still protrudes at the sides then it is deformed and must be

replaced.

Diagnostic system: reading out fault memory and activating systems

Reworking if cowl panel cover deformed

804

 

 

 

 

 

 

 

Content   ..  159  160  161  162   ..