Porshe 911 (997). Manual - part 1220

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  1218  1219  1220  1221   ..

 

 

Porshe 911 (997). Manual - part 1220

 

 

Diagram of body bonding points and sealing elements

Diagram of body bonding points and sealing elements

D

- Expanded sealant in rear side member. If the side member is replaced for repairs, the side member is

sealed with a 2K acoustic filling foam. → 534855 Replacing rear side member

E

- Spot welding/bonding method in area of wheel housing, inner side section and outer side section.

→ 535555 Replacing side section - Cabriolet [997310 997311 997320 997321]→ 535555  Replacing side
section - Cabriolet [997610 997611 997620 997621]

F

Spot welding/bonding method in area of window slot reinforcement → 535555 Replacing side section -

Cabriolet [997310 997311 997320 997321]→ 535555  Replacing side section - Cabriolet [997610
997611 997620 997621]

5037

F

Spot welding/bonding method in area of inner side section → 535555 Replacing side section -

Cabriolet [997310 997311 997320 997321]→ 535555  Replacing side section - Cabriolet [997610
997611 997620 997621]

F

Spot welding/bonding method in area of light housing → 535555 Replacing side section -

Cabriolet [997310 997311 997320 997321]→ 535555  Replacing side section - Cabriolet [997610
997611 997620 997621]

F

- Spot welding/bonding method in area of cross member convertible top rest

G

Seal (moulded part) in area of inner side section and outer side section. → 535555 Replacing side section

- Cabriolet [997310 997311 997320 997321]→ 535555  Replacing side section - Cabriolet [997610
997611 997620 997621]

H

- Water drip pan glued in. When the side panel is replaced for repairs, the water drip pan is glued in on

the inner side section.

I

- Spot welding/bonding method in area of inner lower side member and A-pillar.

J

- Spot welding/bonding method in area of lateral reinforcement → 531755  Lateral reinforcement

The bonding and sealing elements must be replaced during repairs. The procedure is described in the relevant
chapter on body repairs.

997310, 997311, 997320, 997321, 997610, 997611, 997620, 997621

WARNUNG

Gefahr des Verlusts der Text-Bild-Zuordnung beim Ausdruck.

Aus technischen Gründen kann derzeit nicht ausgeschlossen werden, dass trotz
einwandfreier Darstellung auf dem Bildschirm beim Ausdruck der
Zusammenhang von Text und zugehörigem Bild verloren geht.

• 

Wird der Fehler nicht bemerkt, besteht die Gefahr, daß Arbeiten nicht korrekt
durchgeführt werden und es dadurch zu Personen- und Sachschäden kommt.

• 

→ Vergleichen Sie deshalb nach dem Druckvorgang unbedingt die Ausdrucke mit der
Bildschirmdarstellung. Korrigieren Sie die Ausdrucke im Fehlerfall so, daß der Inhalt der
Bildschirmdarstellung zutreffend wiedergegeben wird.

WARNING

Danger of losing text-figure correspondence when printing out.

For technical reasons, it can currently not be ruled out that the correspondence
between text and associated figure can be lost when it is printed out, even though
the display on the screen is correct.

• 

If the fault is not noticed, there is the danger that work will not be performed
correctly which can cause injury and damage.

• 

Diagnostic system: reading out fault memory and activating systems

Diagram of body bonding points and sealing elements

5038

→ Therefore, always compare printouts with the screen display after printing them out. Correct
the printouts if they are faulty so that the content of the screen display matches that on the
printouts.

AVERTISSEMENT

Risque de perte de la correspondance texte-illustration lors de l'impression papier.

Pour des raisons techniques, il ne peut pas être exclu à l'heure actuelle que, même
en cas d'affichage correct à l'écran, la correspondance entre le texte et l'illustration
puisse être erronée sur l'impression papier.

• 

Si l'erreur passe inaperçue, on court le risque d'exécuter certaines opérations de
manière incorrecte pouvant conduire à des dommages corporels et matériels.

• 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Diagram of body bonding points and sealing elements

5039

- Information

Information

Brake disc measurement sheet

Note

Notes on checking and measurement points can be found in:

→ 461000  Technical data/Brake wear limit

• 

→ 465002  Checking front brake disc

• 

→ 465302  Checking rear brake discs (wear assessment)

• 

To document the measured result, a copy or print of the data card illustrated can be used. The data cards
cannot be ordered.

1. Make a copy or print of the data card

shown.

Note

Actual values that are identical in all versions are already entered!

• 

In the course of further development these values may change. If necessary, carry out a check and
insert the new values accordingly. → 461000  Technical data/Brake wear limit

• 

2. Before measurement (Test 1 through Test 3), enter the general data, vehicle type and the missing nominal

values (new brake disc thickness / brake disc wear limit) into the data card.

3. Carry out measurements (actual status) and enter the values in the alignment card.

4. If brake discs are to be replaced, carry out Test 2 with the new discs again and enter the latest values in a

new data card.

Measuring prerequisites

–  Note the labour operation numbers.

–  Measuring brake discs: 80 time units per

axle.

Brake disc measurement

5040

 

 

 

 

 

 

 

Content   ..  1218  1219  1220  1221   ..