Porshe 911 (997). Manual - part 1168

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  1166  1167  1168  1169   ..

 

 

Porshe 911 (997). Manual - part 1168

 

 

AVERTISSEMENT

Risque de perte de la correspondance texte-illustration lors de l'impression papier.

Pour des raisons techniques, il ne peut pas être exclu à l'heure actuelle que, même
en cas d'affichage correct à l'écran, la correspondance entre le texte et l'illustration
puisse être erronée sur l'impression papier.

• 

Si l'erreur passe inaperçue, on court le risque d'exécuter certaines opérations de
manière incorrecte pouvant conduire à des dommages corporels et matériels.

• 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Replacement

4829

50 IN Work sequence for determining scope of
damage to vehicles involved in an accident - as of MY
2005

- Work sequence for determining scope of damage to vehicles involved in an accident

Work sequence for determining scope of damage to vehicles
involved in an accident

Notes

Note

A body is constructed so that it has deformable zones in the front and rear areas. These deformable
zones enable absorption of impact energy through their special design. The bearing structure in these
areas is adapted by a specific cross section reduction to provide optimum energy reduction in the
event of an impact.

• 

Due to the vehicle dimensions in the side area of the body, deformable zones cannot be provided for
absorbing energy. The impact energy can only be absorbed to a lesser extent here through the
deformation of doors and pillars. This is also the case for the roof area where only the roof skin can
absorb impact energy to a very small extent. In these areas, passenger protection is guaranteed by a
rigid design of the passenger cell.

• 

The aim of this design is to absorb the impact energy in defined areas to keep the passenger cell as
free of damage as possible in the event of an accident. If the passenger cell has been deformed in the
event of an accident, extremely large reshaping forces can be expected. Repair work is often only
possible in this case by replacing body parts.

• 

In general, an impact occurs diagonally or offset to the vehicle axle so that mixed forms are usually
the result of a front and side impact or a rear and side impact. The deformation is not always
restricted to the impact area. Due to inertia forces of masses, such as running gear, drive line,
occupants of the vehicle and load or the body itself, deformation can also occur in the opposite areas.

• 

The following work sequence should provide assistance to correctly determine the scope of damage of
vehicles damaged in an accident.

• 

4830

Work sequence for determining scope of damage to vehicles involved in an
accident

1. Identify impact points on the outer shell or the

wheels

2. Remove accessories which limit view of the impact area

3. Check unit mounts, running gear parts and steering parts for deformation and cracks

4. Determine scope of damage on the

body

See Identifiable deformations on the body structure
See No identifiable deformations on the body structure

5. Repair vehicle, if

necessary.

Identifiable deformations on the body structure

1. Visual inspection of the structural parts for creasing and bending, starting from the point of impact

toward the centre of the vehicle

2. Visual inspection of the structural parts at the joints for gaping panel connections (e.g. entry area at the

side member under the rubber seal of the door)

3. Drive vehicle onto a lifting platform and raise. Measure the measuring points or reference points specified

in the repair check dimensions table diagonally, horizontally and vertically using a beam compass or an
electronic measuring system and compare with the specified values.
→ 5  Check dimensions for body repair

4. Decide whether vehicle is technically repairable

5. Decide whether vehicle is economically repairable

Repair vehicle, if necessary.

No identifiable deformations on the body structure

1. Check seam joining line on the accessories

→ 5  Diagram - Body gap dimensions

2. Check accessories for paint abrasion (accessories which have been in contact during the impact)

3. Drive vehicle onto a lifting platform and raise. Measure the measuring points or reference points specified

in the repair check dimensions table diagonally, horizontally and vertically using a beam compass or an
electronic measuring system and compare with the specified values.
→ 5  Check dimensions for body repair

4. Determine scope of any existing damage to vehicle parts

If necessary, measure running gear electronically
→ 449503 Performing front and rear suspension alignment

5. Decide whether vehicle has to be repaired

Repair vehicle, if necessary.

Diagnostic system: reading out fault memory and activating systems

Work sequence for determining scope of damage to vehicles involved in an accident

4831

997111, 997120, 997121, 997310, 997311, 997320, 997321, 997410, 997411, 997430, 997431, 997610,
997611, 997620, 997621

WARNUNG

Gefahr des Verlusts der Text-Bild-Zuordnung beim Ausdruck.

Aus technischen Gründen kann derzeit nicht ausgeschlossen werden, dass trotz
einwandfreier Darstellung auf dem Bildschirm beim Ausdruck der
Zusammenhang von Text und zugehörigem Bild verloren geht.

• 

Wird der Fehler nicht bemerkt, besteht die Gefahr, daß Arbeiten nicht korrekt
durchgeführt werden und es dadurch zu Personen- und Sachschäden kommt.

• 

→ Vergleichen Sie deshalb nach dem Druckvorgang unbedingt die Ausdrucke mit der
Bildschirmdarstellung. Korrigieren Sie die Ausdrucke im Fehlerfall so, daß der Inhalt der
Bildschirmdarstellung zutreffend wiedergegeben wird.

WARNING

Danger of losing text-figure correspondence when printing out.

For technical reasons, it can currently not be ruled out that the correspondence
between text and associated figure can be lost when it is printed out, even though
the display on the screen is correct.

• 

If the fault is not noticed, there is the danger that work will not be performed
correctly which can cause injury and damage.

• 

→ Therefore, always compare printouts with the screen display after printing them out. Correct
the printouts if they are faulty so that the content of the screen display matches that on the
printouts.

AVERTISSEMENT

Risque de perte de la correspondance texte-illustration lors de l'impression papier.

Pour des raisons techniques, il ne peut pas être exclu à l'heure actuelle que, même
en cas d'affichage correct à l'écran, la correspondance entre le texte et l'illustration
puisse être erronée sur l'impression papier.

• 

Si l'erreur passe inaperçue, on court le risque d'exécuter certaines opérations de
manière incorrecte pouvant conduire à des dommages corporels et matériels.

• 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Diagnostic system: reading out fault memory and activating systems

No identifiable deformations on the body structure

4832

 

 

 

 

 

 

 

Content   ..  1166  1167  1168  1169   ..