Porshe 911 (997). Manual - part 1144

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  1142  1143  1144  1145   ..

 

 

Porshe 911 (997). Manual - part 1144

 

 

If the fault is not noticed, there is the danger that work will not be performed
correctly which can cause injury and damage.

• 

→ Therefore, always compare printouts with the screen display after printing them out. Correct
the printouts if they are faulty so that the content of the screen display matches that on the
printouts.

AVERTISSEMENT

Risque de perte de la correspondance texte-illustration lors de l'impression papier.

Pour des raisons techniques, il ne peut pas être exclu à l'heure actuelle que, même
en cas d'affichage correct à l'écran, la correspondance entre le texte et l'illustration
puisse être erronée sur l'impression papier.

• 

Si l'erreur passe inaperçue, on court le risque d'exécuter certaines opérations de
manière incorrecte pouvant conduire à des dommages corporels et matériels.

• 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Gap dimensions, hardtop

4733

- Diagram: Plug plan

Diagram: Plug plan

Top of front of vehicle

Illustrated on the body of an all-wheel drive vehicle

Top of front of vehicle

A - Rubber grommet hole Ø 20 mm
B - Rubber grommet hole Ø 30 mm
C - Plug hole Ø 35 mm

Bottom of front of vehicle

4734

Bottom of front of vehicle

A - Rubber grommet hole Ø 20 mm
B - Rubber grommet hole Ø 30 mm
C - Plug hole Ø 20 mm

Side of front of vehicle

Side of front of vehicle

A - Rubber grommet hole Ø 20 mm
A1 - Rubber grommet hole (only when no sliding roof) Ø 20 mm
B - Plug hole Ø 10 mm
C - Plug hole Ø 15 mm

Bottom of lower side member and floor

Diagnostic system: reading out fault memory and activating systems

Bottom of front of vehicle

4735

Bottom of lower side member and floor

A - Cap hole Ø 15 mm
B - Cap hole Ø 20 mm
C1 - Plug hole (only rear-wheel drive) Ø 10 mm

Top of lower side member and floor

Top of lower side member and floor

A - Rubber grommet hole Ø 20 mm
B - Rubber grommet hole Ø 30 mm
C - Cap hole Ø 30 mm
D - Plug hole Ø 10 mm
E - Cap hole Ø 20 mm

Diagnostic system: reading out fault memory and activating systems

Bottom of lower side member and floor

4736

 

 

 

 

 

 

 

Content   ..  1142  1143  1144  1145   ..