Porshe 911 (997). Manual - part 1096

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  1094  1095  1096  1097   ..

 

 

Porshe 911 (997). Manual - part 1096

 

 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Subsequent work on fusebox

4541

- Preliminary work
- Removing power distributor
- Installing power distributor
- Subsequent work

Preliminary work

Preliminary work for power distributor

Disconnect and cover the ground terminal on the battery. → 271000  Work instruction after disconnecting the
battery

Removing power distributor

Removing power distributor

Installation Location:

4542

Installation position shown on the 911

1. Switch off ignition and remove ignition key.

Releasing locking mechanism of the B+ line

2. Release the locking mechanism of the B+ line -A- and pull off the B+ connection from the power

distributor -B- .

3. Unscrew the two fastening nuts -2- .

Unscrewing fastening screws

4. Unscrew both plastic screws -1- for the cover in the passenger's footwell and remove the cover

downwards.

Diagnostic system: reading out fault memory and activating systems

Removing power distributor

4543

Disengage the power distributor and pull it down and out.

5. Pull the power distributor away from the firewall and lower it down into the passenger's footwell.

Note

If a new power distributor needs to be installed or a fuse element replaced, then a new cover for the fuse
elements (blue) and a new seal label (red) must be fitted. The spare parts are summarised in the PET as a
package.

6. Disengage the lock and fold the cover open. Pull off the original seal label

-arrow-

 .

Unclipping cover with a screwdriver

7. Unclip the cover for the fuse elements with a

screwdriver.

Diagnostic system: reading out fault memory and activating systems

Removing power distributor

4544

 

 

 

 

 

 

 

Content   ..  1094  1095  1096  1097   ..