Porshe 911 (997). Manual - part 107

 

  Index      Hummer     Porshe 911 997 series - service repair manual 2004-2008 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  105  106  107  108   ..

 

 

Porshe 911 (997). Manual - part 107

 

 

→ Comparez impérativement pour cette raison les impressions papier avec l'affichage à l'écran.
Corrigez-les en cas d'erreur de manière à reproduire correctement l'affichage à l'écran.

ATTENZIONE

Pericolo di perdita dell'abbinamento testo-immagine nella stampa.

Per motivi tecnici non è escluso che, nonostante la rappresentazione sullo schermo
risulti perfetta, durante la stampa venga persa la corrispondenza fra testo e
relativa immagine.

• 

Se tale difetto non viene rilevato vi è il pericolo che i lavori non siano eseguiti
correttamente; ciò può avere come conseguenza lesioni e danneggiamenti.

• 

→ Per questo motivo, dopo la stampa è assolutamente necessario confrontare le stampe con la
rappresentazione sullo schermo. In caso di errore si prega di correggere le stampe, così da
garantire la riproduzione esatta della rappresentazione sullo schermo.

ADVERTENCIA

Al imprimir se corre el riesgo de perder la correcta asignación de las figuras al texto.

Por motivos técnicos, por el momento no se puede descartar que, aun siendo
correcta la imagen que aparezca en la pantalla, al imprimir se pierda la
correlación entre el texto y la figura correspondiente.

• 

Si este error pasara desapercibido, existe el riesgo de que los trabajos no se
ejecuten de forma correcta y, por tanto, se produzcan daños personales y
materiales.

• 

→ Por ello le rogamos que tras el proceso de impresión compare siempre las copias impresas con
la imagen de la pantalla. En caso de error, corrija las copias impresas de forma que se
correspondan con el contenido de la imagen de la pantalla.

Diagnostic system: reading out fault memory and activating systems

Subsequent work

585

19 70 19 Removing and installing radiator - as of MY
2005

- Preliminary work
- Removing radiator
- Installing radiator
- Subsequent work

Preliminary work

Preliminary work for removing radiator

→ 505620 21 Removing and installing front wheel housing liner - chapter on "removing"
→ 631519 Removing and installing front apron - chapter on "removing"
→ 193817 Draining and topping up with coolant - chapter on "draining"

1. Remove air guides in front of radiator → 192419 Removing and installing air guide - chapter on

"removing".

Note

The air-conditioning condenser remains in the vehicle. The air-conditioning system is not opened.

2. Detach air-conditioning condenser from side radiator and allow it to hang freely. To do this, remove

hexagon-head sheetmetal screw between air-conditioning condenser and side radiator and pull
air-conditioning condenser out of side brackets.

Removing radiator

Removing radiator

Installation Location:

586

Installation position

Vent line

1. Remove the vent line at the top of the side radiator. To do this, press the lock and pull the line off the

support -1- . Pull the vent line out of the holder -2- .

Cable plug

2. Remove cable plug from fan motor -arrow- . To do this, press cable plug together (relieve plug),

open the release and disconnect the cable plug.

Diagnostic system: reading out fault memory and activating systems

Removing radiator

587

Attachment for hose holder

3. Remove M6 x 16 fastening screw (outer torx) on hose holder -arrow- .

Radiator connections

WARNING

Danger of scalding from hot pressurised coolant.

→ Only work on the coolant system when the engine is

"cool".

→ Wear protective gloves and goggles.

WARNING

Coolant is corrosive and hazardous to health.

Skin and eye irritation

• 

→ Wear protective gloves and goggles.

→ If you come into contact with coolant, wash off immediately with plenty of warm water.

Note

Despite the fact that the coolant has been drained, residual amounts of coolant can still emerge at the joints
during removal. Have sufficient collecting containers and cloths to hand.

4. Disconnect the two coolant hoses from the supports for the side radiator -arrows- . To do this,

loosen the spring-band clamps from the front and push them on to the supports.

Diagnostic system: reading out fault memory and activating systems

Removing radiator

588

 

 

 

 

 

 

 

Content   ..  105  106  107  108   ..