Engine International HS 2.8L. Manual - part 25

International HS 2.8L

116

Tightening Specifications

INTERNATIONAL ENGINES

117

International HS 2.8L

Tightening Specifications

8120081 - 05/02 - Service Manual

INTERNATIONAL ENGINES

International HS 2.8L

118

Tightening Specifications

INTERNATIONAL ENGINES

International HS 2.8L

120

Additional Instructions

INTERNATIONAL ENGINES

ADDITIONAL INSTRUCTIONS

INACTIVE ENGINES CONSERVATION

In order to avoid engine corrosion if it stays
inactive during long period, it is necessary to take
the following providences:

1.

Clean correctly the outer parts of the engine.

2.

Run engine up to the normal operation
temperature. Next, stop and drain oil from oil
pan.

3.

Remove oil pan, clean oil suction pipe and
replace lubricant oil filter cartridge.

4.

Clean breather pipe.

5.

After to reinstall filter, fill oil pan up to the
maximum level, marked on lubricant oil
dipstick with SHELL ENSIS ENGINE MOTOR
oil.

6.

Drain fuel tank and fill it with SHELL
CALIBRATION FLUID B oil.

7.

Run engine until that it reaches normal
operation temperature.

8.

Drain cooling water from engine and radiator.

9.

Remove air filter or any extension of the
intake piping and seal air intake with adhesive
tape.

10. Remove exhaust pipe and seal exhaust

manifold, as well as intake manifold.

11. Disconnect battery and remove it for storage.

Warning:

It contains acid, protect eyes
and hands.

12. Remove fan belt.

13 Complete battery level with distillated water.

Clean terminals, lubricate with grease and
complete charge. Do not use quick charge.
Stock in a fresh, dry and free of dust place.
Complete charge once a month.